ScanFi – this is a wireless module for telescope control systems such as
SynScan, which is used to control the mount Sky Watcher (Synta), ORION. It can be used for rapid targeting telescope with mobile devices. To use the adapter on a PC, you must create a TCP-COM port bridge. HW Virtual Serial Port software creates a TCP-COM bridge allow Windows
based astronomical aplications comunicate throught WIFi moduls. IMPORTANT : No external power
supply or batteries are required to power the WiFi module! The WiFi module settings are made from the WEB interface. The WiFi module works as an access point and can be used to connect all
your astro devices to a single network! Also, the WiFi adapter can operate in local station mode. This WiFi adapter provides full
wireless control of the telescope mount from a laptop or PC, also works with
the SkySafari, Orion StarSeek 4 4.4.4 application for mobile devices. TO GET STARTED: 1. Connect your WiFi module ScanFi in RS-232 serial port connector
before turning the power of the telescope. The RS-232 port (rj12 connector) is located on the bottom of the SynScan
handheld controller! Do not plug the adapter into other connectors, this may
damage it! 2. Turn the telescope. Spend a standard setting procedure recommended by
the manufacturer of the telescope, namely enter into the remote location
coordinates of observation, the current time and make alignment the telescope
at the stars. Then turn on your mobile device WiFi mode and connect to the
access point with SSID - ScanFi. If the device asks for a password during the
connection - enter the line "12345678" and click "OK". Telescope control on the
sample of program SKY SAFARI: 1. After downloading the program, go to Settings, «Settings» button. 2. Scroll down to «Telescope» section and click on the «Setup» button. 3. Select the type of equipment used «Scope Type - SynScan» and type
mount «Mount Type - Equatorial Goto (German)», if you select the azimuthal
mount, respectively, «Alt-Az. GoTo », also select the wireless connection type
in Section Communication Settings -« Connect via WiFi ». 4. In IP address, type the address (192.168.2.x) indicated on your
ScanFi module. 5. In the Port field, enter - 1234. 6. Return to the main menu and press the Connect button. If done correctly, you will hear a pleasant sound, and the screen will
display a crosshair with concentric circles showing where looking telescope,
and on each side there will be buttons move the telescope along the axes of the
mount. Now you can direct the telescope at the object using a large database of
celestial objects Sky Safari. For this use search - «Search» button and select
an item from the list, then click «GoTo». It is also possible to direct the
telescope at an object on the screen. For this you need to click first on it
and then on the button «GoTo». For more details how to use all the features of
the program, see it on official Sky Safari website. In order to improve the quality of the product, the manufacturer
reserves the right to make changes to the design and equipment without
notifying users.
Returns Accepted for this item if it's within 60 Days